The EQ6 is known for its power connector coming out or momentarily disconnecting, which is not something you want happening in the middle of an imaging session. I’d previously replaced all my power connectors to a type with a locking collar and decided to mod my EQ6 so that all my gear uses the same connector. This is not a particularly hard mod if you are confident around electronics and a soldering iron, but it will obviously void your warranty. You have to choose where to fit the connector carefully to avoid any components on the motherboard. Tapping onto the 12v on the board is pretty easy but worth checking with a multi-meter.

EQ6-locking-powwr-mod